PIC12F683 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
256 bytes of EEPROM data memory
Extended WDT
MPLAB® ICD-2 programming support or debugging support with optional header adapter
Precision internal oscillator – software selectable 8 MHz – 32 KHz.
nanoWatt Technology
Software selectable BOR
The Low Pin-count (8) PIC® Flash microcontroller products offer all of the advantages of the well recognized mid-range x14 architecture with standardized features including a wide operating voltage of 2.0-5.5 volts, on-board EEPROM Data Memory, and nanoWatt Technology. Standard analog peripherals include up to 4 channels of 10-bit A/D, an analog comparator module with a single comparator, programmable on-chip voltage reference and a Standard Capture/Compare/PWM (CCP) module.
Tuesday, September 18, 2012
PIC12F635 MCU Code Extraction
PIC12F635 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
KEELOQ® ,PLVD, 128 bytes of EEPROM data memory MPLAB® ICD-2 programming support or debugging support with optional header adapter 8 MHz Internal oscillator software programmable.
This powerful yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® MCU architecture and features such as KeeLoq® compatible Cryptographic Module, PLVD, 1 comparator and 128 bytes of EEPROM data memory into an 8-pin package. This device is easily adapted for automotive, industrial, appliance or consumer product applications that require field re-programmability combined with authentication security. In addition, Microchip’s nanoWatt technology provides outstanding low power performance for optimizing battery powered applications.
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
KEELOQ® ,PLVD, 128 bytes of EEPROM data memory MPLAB® ICD-2 programming support or debugging support with optional header adapter 8 MHz Internal oscillator software programmable.
This powerful yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® MCU architecture and features such as KeeLoq® compatible Cryptographic Module, PLVD, 1 comparator and 128 bytes of EEPROM data memory into an 8-pin package. This device is easily adapted for automotive, industrial, appliance or consumer product applications that require field re-programmability combined with authentication security. In addition, Microchip’s nanoWatt technology provides outstanding low power performance for optimizing battery powered applications.
PIC12F1840 MCU Code Extraction
PIC12F1840 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
Internal 32MHz oscillator
Integrated Capacitive mTouch Sensing Module
Data Signal Modulator Module
MI2C, SPI, EUSART w/auto baud
ECCP (Enhanced/Capture Compare PWM) Module
Comparator with selectable Voltage Reference
4 Channel 10b ADC with Voltage Reference
25mA Source/Sink current I/O
Two 8-bit Timers (TMR0/TMR2)
One 16-bit Timer (TMR1)
Extended Watchdog Timer (EWDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
On Board In-Circuit Debug
Wide Operating Voltage (1.8V – 5.5V)
Low Power PIC12LF182x variants (1.8V – 3.6V)
Standby Current (PIC12LF1840): 20 nA @ 1.8V, typical
Active Current (PIC12LF1840): 50uA/MHz @ 1.8V, typical
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
Internal 32MHz oscillator
Integrated Capacitive mTouch Sensing Module
Data Signal Modulator Module
MI2C, SPI, EUSART w/auto baud
ECCP (Enhanced/Capture Compare PWM) Module
Comparator with selectable Voltage Reference
4 Channel 10b ADC with Voltage Reference
25mA Source/Sink current I/O
Two 8-bit Timers (TMR0/TMR2)
One 16-bit Timer (TMR1)
Extended Watchdog Timer (EWDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
On Board In-Circuit Debug
Wide Operating Voltage (1.8V – 5.5V)
Low Power PIC12LF182x variants (1.8V – 3.6V)
Standby Current (PIC12LF1840): 20 nA @ 1.8V, typical
Active Current (PIC12LF1840): 50uA/MHz @ 1.8V, typical
PIC12F675 MCU Code Extraction
PIC12F675 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® MCU architecture into an 8-pin package and features 4 channels for the10-bit Analog-to-Digital (A/D) converter, 1 channel comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.
Features
128 bytes of EEPROM data memory, Programmable pull-up resistors, MPLAB® ICD-2 programming support or debugging support with optional header adapter, 4 oscillator selections including 4 MHz RC oscillator with programmable calibration and Power-On Reset.
PIC12F1822 MCU Code Extraction
PIC12F1822 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Features
Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
Internal 32MHz oscillator
Integrated Capacitive mTouch Sensing Module
Data Signal Modulator Module
MI2C, SPI, EUSART w/auto baud
ECCP (Enhanced/Capture Compare PWM) Module
Comparator with selectable Voltage Reference
4 Channel 10b ADC with Voltage Reference
25mA Source/Sink current I/O
Two 8-bit Timers (TMR0/TMR2)
One 16-bit Timer (TMR1)
Extended Watchdog Timer (EWDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
On Board In-Circuit Debug
Wide Operating Voltage (1.8V – 5.5V)
Low Power PIC12LF182x variants (1.8V – 3.6V)
Standby Current (PIC12LF182X): 20 nA @ 1.8V, typical
Active Current(PIC12LF1822): 50 uA/MHz @ 1.8V, typical
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
Features
Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
Flash Program Memory with self read/write capability
Internal 32MHz oscillator
Integrated Capacitive mTouch Sensing Module
Data Signal Modulator Module
MI2C, SPI, EUSART w/auto baud
ECCP (Enhanced/Capture Compare PWM) Module
Comparator with selectable Voltage Reference
4 Channel 10b ADC with Voltage Reference
25mA Source/Sink current I/O
Two 8-bit Timers (TMR0/TMR2)
One 16-bit Timer (TMR1)
Extended Watchdog Timer (EWDT)
Enhanced Power-On/Off-Reset
Brown-Out Reset (BOR)
In Circuit Serial Programming (ICSP)
On Board In-Circuit Debug
Wide Operating Voltage (1.8V – 5.5V)
Low Power PIC12LF182x variants (1.8V – 3.6V)
Standby Current (PIC12LF182X): 20 nA @ 1.8V, typical
Active Current(PIC12LF1822): 50 uA/MHz @ 1.8V, typical
PIC12F629 MCU Code Extraction
PIC12F629 MCU Code Extraction, Microcontroller
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
This powerful (200 nanosecond instruction execution) yet easy-
to-program (only 35 single word instructions) CMOS Flash-based
8-bit microcontroller packs Microchip’s powerful PIC® MCU
architecture into an 8-pin package and features 1 channel
comparator and 128 bytes of EEPROM data memory. This device is
easily adapted for automotive, industrial, appliances and
consumer entry-level product applications that require field re
-programmability.
128 bytes of EEPROM data memory, Programmable pull-up resistors,
MPLAB® ICD-2 programming support or debugging support with
optional header adapter, 4 oscillator selections including 4 MHz
RC oscillator with programmable calibration and Power-On Reset.
Decryption,Microchip Pic MCU code extraction, Microchip reverse
engineering, Microchip chip crack. Microchip chip reverse.
Features
This powerful (200 nanosecond instruction execution) yet easy-
to-program (only 35 single word instructions) CMOS Flash-based
8-bit microcontroller packs Microchip’s powerful PIC® MCU
architecture into an 8-pin package and features 1 channel
comparator and 128 bytes of EEPROM data memory. This device is
easily adapted for automotive, industrial, appliances and
consumer entry-level product applications that require field re
-programmability.
128 bytes of EEPROM data memory, Programmable pull-up resistors,
MPLAB® ICD-2 programming support or debugging support with
optional header adapter, 4 oscillator selections including 4 MHz
RC oscillator with programmable calibration and Power-On Reset.
Wednesday, September 12, 2012
Tuesday, September 11, 2012
ATxmega256A3 MCU code extraction
ATxmega256A3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
ATxmega256A3B MCU code extraction
ATxmega256A3B MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system. It also includes dual 12-bit ADC, 2 12-bit DAC channels, 4 analog comparators, AES and DES crypto engines, 7 16-bit timer/counters, 6 USART, 2 SPI, and 2 TWIs, RTC battery backup system, 4-channel DMA controller, and 8-channel event system.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices. This ATxmega series features 64-pin packages.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system. It also includes dual 12-bit ADC, 2 12-bit DAC channels, 4 analog comparators, AES and DES crypto engines, 7 16-bit timer/counters, 6 USART, 2 SPI, and 2 TWIs, RTC battery backup system, 4-channel DMA controller, and 8-channel event system.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices. This ATxmega series features 64-pin packages.
ATxmega256A3BU MCU code extraction
ATxmega256A3BU MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system. It also includes dual 12-bit ADC, 2 12-bit DAC channels, 4 analog comparators, AES and DES crypto engines, 7 16-bit timer/counters, 6 USART, 2 SPI, and 2 TWIs, RTC battery backup system, 4-channel DMA controller, and 8-channel event system.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices. This ATxmega series features 64-pin packages.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system. It also includes dual 12-bit ADC, 2 12-bit DAC channels, 4 analog comparators, AES and DES crypto engines, 7 16-bit timer/counters, 6 USART, 2 SPI, and 2 TWIs, RTC battery backup system, 4-channel DMA controller, and 8-channel event system.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices. This ATxmega series features 64-pin packages.
ATxmega256A3U MCU code extraction
ATxmega256A3U MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
Low power, high performance 8/16-bit AVR microcontroller featuring 256KB self-programming flash program memory, 8KB boot code section, 16KB SRAM, 4096-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
ATxmega256C3 MCU code extraction
ATxmega256C3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 256KB in-system programmable flash memory (8KB boot code section) with read-while-write capabilities, 4KB EEPROM, 16KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with capture, compare and PWM channels, USB Full-speed Device, three USARTs, two two-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit ADC with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection.
ATxmega256D3 MCU code extraction
ATxmega256D3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 256KB ISP flash memory (8KB boot code section) with read-while-write capabilities, 4KB EEPROM, 16KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with compare modes and PWM, three USARTs, two 2-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection. The Program and Debug Interface (PDI), a fast 2-pin interface for programming and debugging, is available. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
Subscribe to:
Posts (Atom)